Ad Radar
Popular Hot Rodding
Click here to find out more!

ford 460

  
Popular Hot Rodding
Item Posts    Sort Order

ford 460

 
swampman60 swampman60
New User | Posts: 1 | Joined: 04/08
Posted: 04/01/08
11:31 PM

I have a 460 in my vehicle and I want it to make around 650 hp. What are the best mods to acheive those kind of numbers.Heads,cam,exhaust... Need help  

55Guy 55Guy
User | Posts: 76 | Joined: 09/07
Posted: 04/03/08
06:59 AM

The 460 has a lot of room to grow, a stroker kit to boost the displacement will be the first best step. From there, a good head/cam/intake combo should get you around 650 with no problem.  

Burtreyn0lds Burtreyn0lds
User | Posts: 89 | Joined: 09/06
Posted: 04/10/08
03:43 PM

yeah, lot's of potential in that motor.  

gtomustang gtomustang
Enthusiast | Posts: 457 | Joined: 06/09
Posted: 02/14/10
03:02 PM

The block has potential, the heads...not so much, unless you have SuperCobraJet or Boss429 heads. Invest in good aftermarket heads first, and if the torque curve isn't broad enough, throw a stroker kit under those heads.  going the opposite way, well...  
Just because you can't do it...doesn't mean its impossible

bdvdw bdvdw
New User | Posts: 34 | Joined: 12/08
Posted: 02/16/10
02:20 PM

see engine masters chalanges, you'll get alot of the dynomatched info that will really help.

off the top of my head. ball park.
would be a great set of aftermarket heads. ask for flow numbers before you buy.
i tried to research them for you but no real luck.
edelbrock performer rpm heads flow decently.
couple those with a 248@ intake degree camshaft or bigger, i prefer a roller, if you can get one. with over .550" lift
run minimume of 10.5:1 compression, i think i'd go with 11:1.
large 2" or 2-1/4" primary pipe headers, a great freeflow exuast.lets try for dual 3" or single 4.5" exuast.
almost 1000cfm carb at 7500rpm.
a big freeflow air filter.
i assume pump gas.
3000rpm+ converter stall.
single plane intake. hi rise.

hell nitrouse would get you way over the top real easy.
so would forced induction, if your interested in something more streetable.  

dond1965 dond1965
New User | Posts: 48 | Joined: 12/13
Posted: 12/01/13
02:57 PM

kaase p-51 heads! tunnel ram,2 850 holleys,solid roller cam.