|
Num Posts
Sort Order
|
hardtimes
New User
| Posts: 2
| Joined: 06/08
Posted: 06/19/08
03:03 PM
|
|
i am building a street/strip motor 350 block bored .040 with speed pro .040 over flat tops 327 camel hump heads 2.020 intake 1.60 exhaust valves 1.52 roller rockers lunati voodoo cam with .525/.546 lift eagle crank and rods victor jr. intake with a 780 cfm carb and a 3500 b&m holeshot converter how should it perform i have 4.11 gears
|
Pontiac4
New User
| Posts: 29
| Joined: 01/08
Posted: 06/22/08
11:41 AM
|
|
Are the heads ported,do you have a standard,3, or 5 or 7 angle valve job was the intake port matched to the heads.
Professonal hi-performance engine builder
|
hardtimes
New User
| Posts: 2
| Joined: 06/08
Posted: 06/24/08
02:39 PM
|
|
yes they have been ported and polished flowing the same as dart pro one heads out of the box the heads had a 7 angle valve job and the intake is ported to match the heads
|
|
|
Pontiac4
New User
| Posts: 29
| Joined: 01/08
Posted: 06/26/08
05:23 AM
|
|
You should be pushing around 465-475hp out of that combo.
Professonal hi-performance engine builder
|