i write out alot of engine combinations for drag racing and this is the latest one ive designed and i was wondering what your guy's opinions would be...

here is the basics (355ci nitrous injected)

aluminum motown block (350mains/4.030 bore)(head studs installed)
scat forged crank (3.480 stroke)
scat forged 4340 rods (5.7")
JE nitrous series pistons (12.2:1)
JE hardened nitrous series rings
milidon 7qt pro comp oil pan
erson cam (234/244 .466/.510 112* lsa)
dart pro 1 heads (200cc intake/64cc chambers 2.05/1.60)(1.437 double springs)(cnc'd exhaust)
Harland Sharp 1.65 ratio rocker arms
crane stud girdle
crane pushrods
lunati double roller timing chain set
motown intake (port matched and direct port nitrous installed)
wilson manifolds 1" tapered carb spacer
willys custom drag carb (750cfm 1.4" venturi and willys drag floats)
NOS pro shot fogger (300hp shot)  

Sounds like it could be a monster. You should check out our Engine Masters Challenge.  

do you have any suggestions or things i need to change or is it pretty solid?